This machine is designed for high production. It produces up to 1000 boards in an 8-hour
period, regardless the model of part to be vibrated.
• VIBRATION: Scale 10 vibration = Tubular system machined between the ends with 4 bearings, in
other words, 2 on each end and with 2 lubrication spots for each vibrator. The bearings are lubricated
with grease and they are automotive graded, therefore being easy to locate and to replace.
• GUIDES: The molds are suspended by means of 4 guides that assure the accuracy of the block
removal. The compaction weight (38 mm of thickness and width according to the size of the machine)
is routed by 3 guides assuring the symmetry of the parts pressed by vibration. These guides as well as
their bushings are movable thus allowing the user to easily perform the replacements.
• EXTRACTION CART: The Extraction cart runs over 4 bearings parts # 6305 and 6306, depending on
the model of the machine. Its support track is replaceable and it is easy to be replaced when it wears
out and it gets abraded (abrasion at the bearings stops due to the time of use of the machine).
• FRAME: Tubular Mono block Frame made of 50 X 50 tubing suited to allow the machine to be fixed on
the floor or moveable (for constructions sites).
Note: Only for the LX.6000 series the Tubular Mono block frame is made of 50 X 100 tubing.
• MOTOR: Our machines are equipped with an Electric Motor (single phase or triphasic). Those who do
not have access to electric energy may choose to use the Multi Flex Line in which the electric motor
can be substituted by a gasoline or diesel powered stationary engine with the option to be adapted to
fuel or cooking gas. Keep in mind that the machine’s drive train system can be provided by means of a
motorcycle or automobile engine with a simple modification to the traction system. In special cases the
energy system can be powered by wind and/or water from rivers or streams.
• MOLDS AND CUPS: Molded on cold forged profile thus reducing the amount of weld spots assuring
increased resistance, accuracy and better finishing. The set of molds can be easily replaced according
to your needs by means of screws of easy fixation. Therefore this model allows you to produce
Structural Blocks, Insulation, ½ Block, Trenches, Tubing Blocks for column production, Pavers, Casting
Elements, Vases for plants and decoration, through this single replacement, Tavela (Flooring Tiles for
Pre Slab), Structural Modules, vibration pressed Ecological Bricks and the BRASILEIRINHO also.